York HVAC Decoder for Indiana
Free York serial number decoder for Indiana homeowners. Decode any York model to find age, capacity, refrigerant, and efficiency rating.
Climate Zone
Cold / Very Cold
Founded
1874
Warranty
10-year limited parts
Headquarters
Milwaukee, WI
York HVAC Systems in Indiana
York has been a leader in the HVAC industry for over 152 years, founded in 1874 and headquartered in Milwaukee, WI. As one of the most recognized names in heating, ventilation, and air conditioning, York manufactures a full range of residential and commercial equipment including central air conditioners, heat pumps, furnaces, air handlers, and ductless mini-split systems.
York, a Johnson Controls brand, has been manufacturing HVAC solutions for over 145 years with industry-leading efficiency.
Best York Equipment for Indiana's Climate
York has continuously improved efficiency to meet evolving federal standards. In 2006, the minimum was raised to SEER 13. In 2015, southern states moved to SEER 14. In 2023, new SEER2 standards took effect: 14.3 SEER2 (South), 13.4 SEER2 (North). Modern York models range from 14 to 26+ SEER.
Regarding refrigerants: York units before 2010 likely use R-22 (phased out since 2020 -- expensive and harmful). Units from 2010-2023 use R-410A. Newest models use R-32 or R-454B to meet EPA regulations. Knowing your refrigerant is critical -- R-22 refills cost $100-200+ per pound.
Indiana HVAC Efficiency Requirements
York model numbers contain encoded information about the equipment type, efficiency rating, capacity (tonnage), and product series. The first 2-3 characters typically indicate the product line and equipment category. The middle section encodes the SEER or AFUE efficiency and BTU capacity, while the trailing characters identify the specific revision.
Understanding your model number helps you order the correct replacement parts, verify warranty coverage, and ensure any new components are compatible with your existing system. Our decoder extracts all of this information automatically from the model number string.
Maintenance Tips for York Units in Indiana
Replace or clean air filters: Every 1-3 months. Clean condenser coils: Annually (spring). Check refrigerant levels: Annually. Inspect electrical connections: Annually. Clean evaporator drain line: Every 6 months. Test thermostat calibration: Annually. Inspect ductwork for leaks: Every 2-3 years.
Refrigerant Considerations in Indiana
Regarding refrigerants: York units before 2010 likely use R-22 (phased out since 2020 -- expensive and harmful). Units from 2010-2023 use R-410A. Newest models use R-32 or R-454B to meet EPA regulations. Knowing your refrigerant is critical -- R-22 refills cost $100-200+ per pound.
York Equipment Types in Indiana
FAQ
How do I find the age of my York HVAC unit?
Enter your York serial number into our free decoder. York uses a Year-Letter-Week (Y+L+WW) format. We parse it instantly and calculate the exact age, plus a condition status.
Is York a good HVAC brand?
York is one of the most established manufacturers, founded in 1874 with over 152 years of experience. They offer 10-year limited parts and consistently rank among top brands.
What does a York serial number look like?
York serial numbers follow a Year-Letter-Week (Y+L+WW) format. Example: "W1G3412345". Find it on the metal data plate on the unit.
How long is the York warranty?
York typically offers 10-year limited parts on residential equipment when properly registered.
What is the difference between a York model number and serial number?
The model number identifies the product type, efficiency, and capacity (same for all identical units). The serial number is unique to each unit and encodes the manufacturing date and location. You need both to fully identify your York HVAC equipment.
Where is the serial number on a York unit?
The serial number is on the metal data plate (also called nameplate or rating plate). On outdoor units, check the side panel near the refrigerant lines. On indoor units, look on the front panel, inside the cabinet door, or near the electrical access panel.
Can I determine the tonnage from a York model number?
Yes. York model numbers encode capacity (BTU/h) in specific positions. For example, in model "YZF04811C", the capacity digits indicate the BTU rating. Divide by 12,000 to get tonnage. Our decoder does this automatically.
What refrigerant does my York unit use?
Units manufactured before 2010 likely use R-22 (now phased out and expensive). Units from 2010-2023 typically use R-410A. Newest models may use R-32 or R-454B. Your model number can reveal the refrigerant type.